Set Data Transfer Format; Read Data - Agilent Technologies 4396B Gpib Programming Manual

If the number of measurement points change, then so does the number of data. Instrument
BASIC allows for insucient data in lines 220 to 270 (see \Read Data").

Set Data Transfer Format

To use FORM3 the computer must be instructed to stop formatting the incoming data with the
statement. This is the same operation that is done in the program in Figure 4-3. For
more information, see \Set Data Transfer Format" in Figure 4-3.

Read Data

When all the data is transferred and no data is left for the receive arrays, and ,
the program goes to the next operation.
4-10 Reading Measurement Data