Using the I/O Port in BASIC Programs
The Instrument BASIC can directly control the I/O port without using GPIB commands. This is
faster than using the
data
See Appendix B for more information on
For more information on the I/O port, see \I/O port" in Chapter 12 of the
7-4 Program I/O
and
GPIB commands.
Reads the 4-bit data from the I/O Port and returns a decimal value.
Outputs the decimal value of the 8-bit data to the OUT 0 to 7 lines of
the I/O port. The OUT 0 signal is the LSB (least signicant bit), while
the OUT 7 signal is the MSB (most signicant bit).
and
commands.
Function Reference.