Writeio - Agilent Technologies 4396B Gpib Programming Manual

WRITEIO

Keyboard Executable
Programmable
In an IF . . . THEN . . .
This statement writes register data in decimal notation to a speci ed EXECUTE command
parameter register or to a speci ed I/O port.
Item
select code numeric expression
register number numeric expression
register data numeric expression
Example Commands
Semantics
How to write data to the I/O port:
When writing data to an I/O port, use
that corresponds with the register. The range of register data for the I/O port is 0
through 255.
How to write GPIB command parameters when the
The command uses the data stored in a register (select code 8) as a parameter.
To store this parameter, the
command. The
command. For an GPIB command that requires multiple parameters, use as many
commands as the number of parameters. For more information on the
command, see the \EXECUTE" command.
B-12 BASIC Commands Speci c to 4396B
Yes
Yes
Yes
Description
command must be executed before the
command stores one parameter in one register like the
8: EXECUTE register
15: I/O port
0 to 800 (Select code 8)
0: I/O port
2147483648 to +2147483647
0 to 255: I/O port
as the select code and the register number
command is used:
Range