What are the other
marker commands?
1 Before executing these commands, you must turn on the markers to be moved.
Read Data
The
command returns the marker value in the following order: primary part of data,
secondary part of data, and sweep parameter.
What are other marker
value commands?
You can activate sub-markers and the 1marker using the
following commands:
,
You can move the marker using the following commands:
specied sweep parameter
specied measurement point
You can move sub-markers using the following commands:
specied sweep parameter
specied measurement point
You can move the 1marker using the following commands:
specied sweep parameter
specied primary part of marker
value
specied secondary part of
marker value
You can get the marker value using the following commands:
get primary part of marker value
get secondary part of marker value
get sweep parameter
get data point number
You can get the sub-marker value using the following commands:
get primary part of sub-marker value
get secondary part of sub-marker value
get sweep parameter
get data point number
You can get the 1marker value using the following commands:
get primary part of 1marker value
get secondary part of 1marker value
get sweep parameter
1
parameter
parameter
1
parameter
parameter
1
parameter
parameter
parameter
Reading Measurement Data
4-3