To Wait For The Preceding Operation To Complete; Let Controller Wait For Operation To Complete (Opc); Sample Program: To Wait For The Preceding Operation To Complete - Agilent Technologies 4396B Gpib Programming Manual

d
To W ait For the Preceding Operation to Complete
c
Figure 3-2. Sample Program: To Wait for the Preceding Operation to Complete

Let Controller Wait For Operation to Complete (OPC)

In line 80, the
a .
In line 90, the controller pauses the program until the analyzer returns a .
For example, in the sample program in Figure 1-3 (Chapter 1), the
follows:
You cannot use
the status byte for these functions.
3-2 Synchronizing the Analyzer from Remote
command waits for the preceding operations to complete and then returns
for the functions listed under SRQ (at the beginning of the chapter). Use
command is used as
a
b