Numeric Keypad; Editing Keys - Agilent Technologies 4396B Gpib Programming Manual

Numeric Keypad

The numerical keypad provides a convenient way to enter numbers and perform arithmetic
operations. Just type in the arithmetic expression you want to evaluate, then press
result is displayed in the lower-left corner of the screen.
4 Enter 5
4 Num Lock 5

Editing Keys

Insert
4 5
-
Shift Insert
4 5 4 5
4 Delete 5
-
4 Shift 5 4 Delete 5
4 End 5
-
4 Shift 5 4 End 5
Home
4 5
Program Control Keys
The following keys allow you to control execution of the program stored in the analyzer's
memory.
4 Pause 5
-
4 Ctrl 5 4 Break 5
Performs the same function as the
serves the same function as the numerical keypad on the front panel of
the analyzer.
Performs no function. Pressing the
but the keys are performes as the numerical keypad only.
Performs no function. The Instrument BASIC is always in the insert mode.
The characters you type are always inserted to the left of the cursor.
Inserts a new line above the cursor's current position (edit mode only).
Deletes the character at the cursor's position.
Deletes the line containing the cursor (edit mode only).
Delete the line containing the cursor except the line number.
Clears from the current cursor position to the end of the line.
Clears the entire alpha screen. In EDIT mode, this exits the EDIT mode.
or - pauses program execution after the current line.
4 Pause 5 4 Alt 5 4 F4 5
Pressing in the System menu resumes program execution from
NNNNNNNNNNNNNNNNNNNNNNNNNN
the point where it paused.
- - stops program execution after the current line. To restart
Shift Alt F4
4 5 4 5 4 5
the program, press
NNNNNNNNNNN
When in the editor mode,
- resets program execution immediately without erasing the
4 Ctrl 5 4 Break 5
program from memory ( BASIC RESET ).
Pauses program execution when the computer is performing or trying to
perform an I/O operation. Press
when the computer is hung up during an I/O operation, because
- works only after the computer nishes the current program line.
4 Alt 5 4 F4 5
key. The numerical keypad
4 Enter 5
4 Num Lock 5
in the System menu.
- - exits the edit mode.
4 Shift 5 4 Alt 5 4 F4 5
- instead of
4 Alt 5 4 F5 5
Enter
4
key causes the LED ON/OFF,
or
4 Pause 5 4 Alt 5
Pause
4
The Keyboard C-3
. The
5
-
4 F4 5
or
5