Listing to Printer
For hard copy output, an parallel cable must connect the analyzer to the
Note
printer.
1. Set the output device to be a printer as follows:
2. Press the following key among the 3 menus which leads to the
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN
You can list from the keyboard. Type and press as follows:
Enter
4
5
The program is listed on the printer.
3. Get the output device back to LCD:
Getting Programs (GET)
You can retrieve a program from the disk as follows:
1. If the display allocation is ALL INSTRUMENT, change the allocation to either HALF
INSTRument HALF BASIC or ALL BASIC. For example:
NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Display
4
5
2. Press the following key among the 3 menus which leads to the
lename you want to retrieve:
NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNN
You can get the le from the keyboard. Type and press as follows:
le name
4
Enter
If You Need More Information
This chapter is an introduction to saving and retrieving programs on a disk. For more
information, see the following chapters and documents:
For more information on
IBASIC menu
Initializing a disk
4
Enter
5
4
Enter
5
4
Enter
5
le-name
4
Enter
5
5
\IBASIC Menu" in Appendix C.
\Save Menu" in Chapter 8 of the
-
key:
4
Shift
5
4
F9
5
-
key and type the
4
Shift
5
4
F9
5
See
Function Reference.
Saving and Getting Programs 4-3