Sharing One Printer Between Two Controllers - Agilent Technologies 4396B Gpib Programming Manual

Sharing One Printer Between Two Controllers

This program shows an example of sharing one printer between two controllers. The analyzer
and the external controller use the printer in sequence. The external controller uses the printer
rst. The following is assumed:
Two controllers and one printer on the same GPIB bus
Figure 6-7 is executed on the external controller
Figure 6-8 is in the Instrument BASIC editor
d
c
Figure 6-7. Sharing a Printer (Program for External Controller)
d
c
Figure 6-8. Sharing a Printer (Program for Instrument BASIC)
Application Programs 6-5
a
b
a
b