4. Then press the following key on the keyboard:
4
Enter
5
The START value is changed to 100 kHz.
5. Next, type the following value and key:
Enter
4
5
After pressing
Enter
4
character \ " and \ " in an exponential expression.
Pressing
on the keyboard deletes the last entry. This performs the same function as
4
Backspace
5
pressing
on the front panel.
4
Back Space
5
Entering Titles
The character entry keys can be used to enter a title on the screen instead of using front panel
operation.
Let's Try
1. Press the following key and softkey:
NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNN
Display
4
5
A cursor appears at the top left of the graticule.
2. Type in characters using the keyboard, the characters you type appear at the top of the
graticule.
3. Press the following key to terminate entry:
4
Enter
5
You can enter standard uppercase and lowercase letters for the title, using the
access the alternate case as usual. For more information on the character entry keys, see
\Character Entry Keys" in Appendix C.
Executing Commands
You can type in and execute commands from the keyboard at all times except when:
The display allocation is ALL INSTRUMENT.
A command is being executed.
The analyzer is in the EDIT mode.
At all other times, you can type in commands and press
for execution. The system parses the command and takes the appropriate action.
Let's Try
1. Press the following key and softkey:
NNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
Display
4
5
2. To check the current mass storage, type the following command:
3. The system returns:
2-6 Introduction to the System
the active function value is changed to 2 MHz. You can use the
5
Enter
4
5
to present them to the system
4
Enter
5
key to
Shift
4
5