To Execute An Instrument Basic Command From The External Controller - Agilent Technologies 4396B Gpib Programming Manual

Or, you can return control to the external controller by resetting the GPIB as follows:
d
4 Return 5
This returns active control to the system controller.
Note
The PROGram subsystem commands in the following programs can be used
on the external controller. See the
additional information on the use of SCPI commands.
To Execute an Instrument BASIC Command from the External
Controller
Combine the
example, to execute
d
Or you can change the double quoted term,
d
Be careful when you execute an Instrument BASIC command that requires a parameter. For
example, to execute the Instrument BASIC command \
follows.
d
Return Control (On External Controller)
command with Instrument BASIC command to be executed. For
command,
GPIB Command Reference
to a single quote
", the quotation is as
Controlling Instrument BASIC from Remote
a
manual for
a
', as follows.
a
a
7-3