Run The Instrument Basic Program; To Transfer The Program To Instrument Basic; Open The Instrument Basic Editor; Sample Program : To Transfer The Program To Instrument Basic - Agilent Technologies 4396B Gpib Programming Manual

Run the Instrument BASIC Program

Line 120 runs the following program in the Instrument BASIC editor:
d
Line 20 retrieves the

To Transfer the Program to Instrument BASIC

d
c
Sample Program : To Transfer the Program to Instrument BASIC (on External Controller)
This Program transfers the program le in the mass storage of the external controller.
Before you run this program, con rm that the le to be transferred is on the mass storage
device.

Open the Instrument BASIC Editor

Scratch any program that currently exists in the analyzer's Instrument BASIC editor and open
the editor.
program and at the same time runs the program.
Figure 7-4.
Controlling Instrument BASIC from Remote
a
a
b
7-5