GPIB Commands for Instrument BASIC
The PROGram subsystem commands of the analyzer's GPIB commands are used to control
Instrument BASIC. The PROGram subsystem commands do the following:
Download the program from an external controller to the analyzer
Upload the program from the analyzer to an external controller
Delete the program on the BASIC editor of the analyzer
Execute the program on the BASIC editor of the analyzer
Set or query the variables and arrays in the program on the BASIC editor of the analyzer
Set or query the state of the program on the BASIC editor of the analyzer
See the
GPIB Command Reference
their usage example.
The PROGram subsystem commands can be used from an external controller
Note
only.
for more information and the
Analyzer Specic Instrument BASIC Features 9-3
Programming Guide
for