Readio - Agilent Technologies 4396B Gpib Programming Manual

READIO

Keyboard Executable
Programmable
In an IF . . . THEN . . .
This command reads the contents of the register used for an I/O port or EXECUTE command.
Item
select code numeric expression
register number numeric expression
Example Commands
Semantics
The EXECUTE command stores the query command's return values in registers. The
command reads a return value from one of these registers. Return values are sequentially
stored in registers 0 to 3. For example, when
return values , , , and
stored in register 0,
value stored by the
information on
Yes
Yes
Yes
Description
are stored in four registers, register 0 to register 3.
in register 1, in register 2, and
command, specify the appropriate register number. For more
command, see the example in the \EXECUTE" command.
Range
8: EXECUTE register
15: I/O port
0 to 800 (Select code 8)
0: I/O port
is executed, four
in register 3. To read a return
BASIC Commands Speci c to 4396B B-7
is