To Synchronize External Handler With Analyzer; Send Signal To The External Handler; Sample Program : Synchronization Of An External Handler With The Analyzer - Agilent Technologies 4396B Gpib Programming Manual

d

To Synchronize External Handler with Analyzer

c

Sample Program : Synchronization of an External Handler with the Analyzer

Send Signal to the External Handler

The
parameter
command sets the OUT 3 line to TRUE (1).
10-2 Using the Analyzer's I/O Port
command sets the 8-bit data value of the OUT 0-7 lines. The
Figure 10-3. 8-Bit Data of OUT0-7
Figure 10-4. Sending Signal to an the External Handler
Figure 10-2.
a
b