Agilent Technologies 4396B Gpib Programming Manual page 93

Manual Changes
Introduction
This appendix contains the information required to adapt this manual to earlier versions or
con gurations of the analyzer than the current printing date of this manual. The information
in this manual applies directly to the 4396B Network/Spectrum Analyzer serial number pre x
listed on the title page of this manual.
Manual Changes
To adapt this manual to your 4396B, see Table A-1 and Table A-2, and make all the manual
changes listed opposite your instrument's serial number and rmware version.
Instruments manufactured after the printing of this manual may be di erent from those
documented in this manual. Later instrument versions will be documented in a manual
changes supplement that will accompany the manual shipped with that instrument. If your
instrument's serial number is not listed on the title page of this manual or in Table A-1, it may
be documented in a
yellow MANUAL CHANGES
In additions to change information, the supplement may contain information for correcting
errors (Errata) in the manual. To keep this manual as current and accurate as possible,
Agilent Technologies recommends that you periodically request the latest
supplement.
For information concerning serial number pre xes not listed on the title page or in the
MANUAL CHANGE
Turn on the line switch or execute the
version. See the
GPIB Command Reference
Serial Pre x or Number
supplement, contact the nearest Agilent Technologies oce.
Table A-1. Manual Changes by Serial Number
Table A-2. Manual Changes by Firmware Version
Version
1.0X
supplement.
command by GPIB to con rm the rmware
manual for information on the
Make Manual Changes
Make Manual Changes
Change 1
A
MANUAL CHANGES
command.
Manual Changes A-1