Flexible Card Line Processing Unit(Lpuf-21-A/Lpuf-21-B/Lpuf-21-E,2 Sub-Slots) - Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Table 6-498 Product specifications of the 40-Port 10/100/1000Base-RJ45 Line Processing Unit S.
Item
Supported protocol
and service
Interface type
Reliability and
availability
NMS
Operating
conditions
Storage conditions
6.22 Flexible Card Line Processing
Unit(LPUF-21-A/LPUF-21-B/LPUF-21-E,2 sub-slots)
This chapter describes the structure and specifications of the LPUF-21.
Overview
The LPUF-21 has three models:LPUF-21-A,LPUF-21-B and LPUF-21-E.
The LPUF-21-A supports L3VPN whereas the LPUF-21-B supports all software features
except L3VPN, MVPN, and IPv6 and the LPUF-21-E supports PPPoE and IPoE.
The LPUF-21 provides two slots, each of which can hold one half-width FPIC.After removing
the slide rails between the two slots on the LPUF-21, you can insert a full-width FPIC into the
slot.
Figure 6-174
Issue 01 (2012-09-30)
Specifications
IP
Electrical interface: RJ45
Hardware feature
 Supporting hot swap
Enhanced command-line interface
SNMP and MIB support
Long-term ambient temperature: 0° C to 45° C ( 32° F to 113° F )
Short-term ambient temperature- -5° C to +55° C ( 23° F to 131° F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage temperatu-e: -40° C to +70° C ( -40° F to 158° F )
Storage humidity: 0% to 95%
shows the appearance of the LPUF-21.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
494