Huawei NetEngine40E Hardware Description page 478

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Component
L/A
indicator(green)
Interface Attributes
Table 6-451
Processing Unit S.
Table 6-451 Interface attributes of the 4-port 10GBase LAN/WAN-XFP Line Processing Unit S
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-452 Attributes of 10G XFP optical modules
Attributes
Transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload
power
Optical fiber
Issue 01 (2012-09-30)
Description
Hz), it indicates that the system is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 4-port 10GBase LAN/WAN-XFP Line
Description
LC/PC
Compliant with the selected XFP optical module. (For the attributes of
XFP modules, see
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19
mi. )
850 nm
-7.3 dBm
-1.3 dBm
-7.5 dBm
-1.0 dBm
Multi-mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-452)
10 km ( 6.21 40 km ( 24.86
mi. ) mi. )
1310 nm 1550 nm
-6.0 dBm -1.0 dBm
-1.0 dBm 2.0 dBm
-11.0 dBm -15.0 dBm
0.5 dBm -1.0 dBm
Single-mode Single-mode
6 Boards
80 km ( 49.71
mi. )
1550 nm
0 dBm
4.0 dBm
-24.0 dBm
-7.0 dBm
Single-mode
464