Huawei NetEngine40E Hardware Description page 418

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Indicator
LINK/ACT
indicator(green)
Interface Attributes
Table 6-359
E(P40-E).
Table 6-359 Interface attributes of the 20-Port 1000Base-X-SFP Flexible Card E(P40-E)
Attributes
Optical interface
attributes
Working mode
Frame format
Network protocol
Table 6-360 Attributes of 1000M SFP optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload optical
power
Optical fiber type
Issue 01 (2012-09-30)
Description
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 20-Port 1000Base-X-SFP Flexible Card
Description
Compliant with the selected SFP optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.5 km 10 km
( 0.31 ( 6.21
mi. ) mi. )
850 nm 1310 nm
-9.5 dBm -9.5 dBm
-2.5 dBm -3.0 dBm
-17.0 -20.0
dBm dBm
0 dBm -3.0 dBm
Multi-mo Single-m
de ode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40 km 40 km
( 24.86 ( 24.86
mi. ) mi. )
1310 nm 1550 nm
-4.5 dBm -4.0 dBm
3.0 dBm 1.0 dBm
-22.5 -21.0
dBm dBm
-3.0 dBm -3.0 dBm
Single-m Single-m
ode ode
6 Boards
80 100 km
km( 49. ( 62.14
71 mi. ) mi. )
1550
1550 nm
nm
-2.0 0 dBm
dBm
5.0 5.0 dBm
dBm
-23.0 -30.0
dBm dBm
-3.0 -9.0 dBm
dBm
Single- Single-m
mode ode
404