Huawei NetEngine40E Hardware Description page 204

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Attributes
Optical
interface
attributes
Working mode
Compliant
standard
Frame format
Network
protocol
Table 6-28 Attributes of 10G XFP optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload
optical power
Optical fiber
type
The 10G XFP multi-mode optical module transceiver supports two types of multi-mode
optical fibers with different cores.
modal/bandwidth, and the transmission distance. During configuration, the length of optical
fibers is restricted by the transmission distance. In addition, the optical fiber with the 50-um
core and 2000-MHz*km modal/bandwidth is a special type. If this type of optical fiber is
required, you need to purchase it additionally.
Issue 01 (2012-09-30)
Description
Compliant with the selected XFP optical module.(for the attributes of
XFP modules, see Table
Full-duplex
IEEE 802.3ae
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19 10 km ( 6.21
mi. ) mi. )
850 nm 1310 nm
-7.3 dBm -6.0 dBm
-1.3 dBm -1.0 dBm
-7.5 dBm -11.0 dBm
-1.0 dBm 0.5 dBm
Multi-mode Single-mode
Table 6-29
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6-28)
40 km ( 24.86
mi. )
1550 nm
-1.0 dBm
2.0 dBm
-15.0 dBm
-1.0 dBm
Single-mode
shows the relationship between the core, the
6 Boards
80 km ( 49.71
mi. )
1550 nm
0 dBm
4.0 dBm
-24.0 dBm
-7.0 dBm
Single-mode
190