Huawei NetEngine40E Hardware Description page 375

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description


Figure 6-113 Appearance of the 8-port 100/1000 Base-X-SFP Flexible Card A (Supporting
1588v2)
Panel
Table 6-287
Table 6-287 Indicators on the panel of the 8-port 100/1000 Base-X-SFP Flexible Card A
Indicator
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 6-288
Table 6-288 Interface attributes of the 8-port 100/1000 Base-X-SFP Flexible Card A
Attributes
Connector type
Optical interface
attributes
Issue 01 (2012-09-30)
Electrical interface SFP module, providing features of the 1000M electrical interfaces
Intermixing of the preceding modules
The 8-port 100/1000 Base-X-SFP Flexible Card A does not support convergence when installed on an
LPU (LPUF-50, occupying four sub-slots).
describes the indicators on the panel.
Description
If the indicator blinks every 2s (0.5 Hz), the flexible card is in the
normal state state.
If the indicator blinks twice every 1s (2 Hz), the flexible card is in the
alarm state.
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
lists the interface attributes of the 8-port 100/1000 Base-X-SFP Flexible Card A.
Description
LC/PC, RJ45
Compliant with the selected SFP optical module
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
361