Huawei NetEngine40E Hardware Description page 528

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Indicator
LINK/ACT
indicator(green)
Interface Attributes
Table 6-527
Table 6-527 Interface attributes of the 12-port 100/1000Base-SFP FPIC
Attributes
Connector type
Optical interface
attributes
Working mode
Frame format
Network protocol
Table 6-528 Attributes of 100M SFP optical modules
Attributes
Maximum
transmission
distance
Center wavelength
Minimum
transmitting power
Maximum
transmitting power
Receiving
sensitivity
Overload optical
power
Optical fiber type
Issue 01 (2012-09-30)
Description
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 12-port 100/1000Base-SFP FPIC.
Description
LC/PC
Compliant with the selected SFP optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
2 km ( 1.24
mi. )
1310 nm
-19.0 dBm
-14.0 dBm
-30.0 dBm
-14.0 dBm
Multi-mode
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 km ( 9.32 40 km ( 24.86
mi. ) mi. )
1310 nm 1310 nm
-15.0 dBm -5.0 dBm
-8.0 dBm 0 dBm
-31.0 dBm -37.0 dBm
-8.0 dBm -10.0 dBm
Single-mode Single-mode
6 Boards
80 km ( 49.71
mi. )
1550 nm
-5.0 dBm
0 dBm
-37.0 dBm
-10.0 dBm
Single-mode
514