Huawei NetEngine40E Hardware Description page 207

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Panel
Table 6-32
Table 6-32 Indicators on the panel of the 24-Port 100/1000Base-SFP FPIC
Component
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 6-33
Table 6-33 Interface attributes of the 24-Port 100/1000Base-SFP FPIC
Attributes
Connector type
Optical interface
attributes
Working mode
Compliant standard
Frame format
Network protocol
Table 6-34 Attributes of 100M SFP optical modules
Attributes
Transmission
distance
Center wavelength
Minimum
transmitting power
Maximum
transmitting power
Receiving
sensitivity
Issue 01 (2012-09-30)
lists the indicators on the panel.
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 24-Port 100/1000Base-SFP FPIC.
Description
LC/PC
Compliant with the selected SFP optical module. For the attributes
of SFP modules, see
Full-duplex
IEEE 802.3-2002
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
2 km ( 1.24
mi. )
1310 nm
-19.0 dBm
-14.0 dBm
-30.0 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-34 and Table
15 km ( 9.32 40 km ( 24.86
mi. ) mi. )
1310 nm 1310 nm
-15.0 dBm -5.0 dBm
-8.0 dBm 0 dBm
-31.0 dBm -37.0 dBm
6 Boards
6-35.
80 km ( 49.71
mi. )
1550 nm
-5.0 dBm
0 dBm
-37.0 dBm
193