Huawei NetEngine40E Hardware Description page 217

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-20 Appearance of the 5-Port 10GBase LAN/WAN-SFP+ Flexible Card B
Table 6-49 Indicators on the panel of the 5-Port 10GBase LAN/WAN-SFP+ Flexible Card B
Component
RUN (green)
L/A (green)
Interface Attributes
Table 6-50
B.
Table 6-50 Interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Flexible Card B
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-51 Attributes of 10G SFP+ optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
If the indicator is steady on, it indicates that the link is normal. If the
indicator blinks, it indicates that data is being transmitted. If the
indicator is off, it indicates that the link is Down.
lists the interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Flexible Card
Description
LC/PC
Compliant with the selected SFP+ optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19 mi. )
850 nm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 km ( 1.24 mi. )
1310 nm
6 Boards
40 km ( 24.86 mi. )
1550 nm
203