Huawei NetEngine40E Hardware Description page 311

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Component
RUN (green)
L/A
indicator(green)
Interface Attributes
Table 6-192
Line Processing Unit B.
Table 6-192 Interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Integrated Line
Processing Unit B
Attributes
Connector type
Optical interface
attributes
Working mode
Frame format
Network protocol
Table 6-193 Attributes of 10G SFP+ optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload optical
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Integrated
Description
LC/PC
Compliant with the selected SFP+ optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km
850 nm
-7.3 dBm
-1 dBm
-11.1 dBm
-1.0 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 km
1310 nm
-8.2 dBm
0.5 dBm
-12.6 dBm
0.5 dBm
6 Boards
40 km
1550 nm
-4.7 dBm
4.0 dBm
-14.1 dBm
0.5 dBm
297