Huawei NetEngine40E Hardware Description page 224

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Table 6-60 Indicators on the panel of the 10-Port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Component
OFL button
OFL indicator
(red)
RUN (green)
L/A (green)
Interface Attributes
Table 6-61
Line Processing Unit.
Table 6-61 Interface attributes of the 10-Port 10GBase LAN/WAN-XFP Integrated Line
Processing Unit
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-62 Attributes of 10G XFP optical modules
Attributes
Transmission
distance
Center
wavelength
Minimum
Issue 01 (2012-09-30)
Description
It is an OFL button. Before removing a board, press the OFL button.
Hold the button for six seconds till the OFL indicator is on. Then, the
board can be pulled out.
If the indicator is steady on, it indicates that you can remove the
board.
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
If the indicator is steady on, it indicates that the link is normal. If the
indicator blinks, it indicates that data is being transmitted. If the
indicator is off, it indicates that the link is Down.
lists the interface attributes of the 10-Port 10GBase LAN/WAN-XFP Integrated
Description
LC/PC
Compliant with the selected XFP optical module. (For the attributes of
XFP modules, see
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19
mi. )
850 nm
-7.3 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-62)
10 km ( 6.21 40 km ( 24.86
mi. ) mi. )
1310 nm 1550 nm
-6.0 dBm -1.0 dBm
6 Boards
80 km ( 49.71
mi. )
1550 nm
0 dBm
210