Huawei NetEngine40E Hardware Description page 398

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Panel
Table 6-322
Table 6-322 Indicators on the panel of the 20-port 100/1000Base-X-SFP Flexible Card
Indicator
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 6-323
Table 6-323 Interface attributes of the 20-port 100/1000Base-X-SFP flexible card
Attributes
Connector type
Optical interface
attributes
Working mode
Frame format
Network protocol
Table 6-324 Attributes of 100M SFP optical modules
Attributes
Maximum
transmission
distance
Center wavelength
Minimum
transmitting power
Maximum
transmitting power
Issue 01 (2012-09-30)
describes the indicators on the panel.
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state.
If the indicator blinks twice every 1s (2 Hz), the FPIC is in the alarm
state.
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
lists the interface attributes of the 20-port 100/1000Base-X-SFP flexible card.
Description
LC/PC
Compliant with the selected SFP optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
2 km ( 1.24
mi. )
1310 nm
-19.0 dBm
-14.0 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 km ( 9.32 40 km ( 24.86
mi. ) mi. )
1310 nm 1310 nm
-15.0 dBm -5.0 dBm
-8.0 dBm 0 dBm
6 Boards
80 km ( 49.71
mi. )
1550 nm
-5.0 dBm
0 dBm
384