Huawei NetEngine40E Hardware Description page 379

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-115 Appearance of the 2-Port 10GBase WAN/LAN-SFP+ Flexible Card A
Table 6-293 Indicators on the panel of the 2-Port 10GBase WAN/LAN-SFP+ Flexible Card A
Component
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 6-294
Card A.
Table 6-294 Interface attributes of the 2-Port 10GBase WAN/LAN-SFP+ Flexible Card A
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state.
If the indicator blinks twice every 1s (2 Hz), the FPIC is in the alarm
state.
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
lists the interface attributes of the 2-Port 10GBase WAN/LAN-SFP+ Flexible
Description
LC/PC
Compliant with the selected SFP+ optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
365