Huawei NetEngine40E Hardware Description page 338

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Table 6-232 Indicators on the panel of the 5-Port 10GBase LAN/WAN-SFP+ Line Processing
Unit S
Component
OFL button
OFL indicator
(red)
RUN (green)
L/A (green)
Interface Attributes
Table 6-233
Processing Unit S.
Table 6-233 Interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Line Processing Unit S
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-234 Attributes of 10G SFP+ optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
Issue 01 (2012-09-30)
Description
It is an OFL button. Before removing a board, press the OFL button.
Hold the button for five seconds till the OFL indicator is on. Then, the
board can be pulled out.
If the indicator is steady on, it indicates that you can remove the
board.
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
If the indicator is steady on, it indicates that the link is normal. If the
indicator blinks, it indicates that data is being transmitted. If the
indicator is off, it indicates that the link is Down.
lists the interface attributes of the 5-Port 10GBase LAN/WAN-SFP+ Line
Description
LC/PC
Compliant with the selected SFP+ optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19 mi. )
850 nm
-7.3 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10 km ( 1.24 mi. )
1310 nm
-8.2 dBm
6 Boards
40 km ( 24.86 mi. )
1550 nm
-4.7 dBm
324