Huawei NetEngine40E Hardware Description page 512

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-177 Panel appearance of the 1-port 10GE LAN/WAN FPIC
Table 6-502 Indicators on the panel of the 1-port 10GBase LAN/WAN-XFP FPIC
Indicator
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 6-503
Table 6-503 Interface attributes of the 1-port 10GBase LAN/WAN-XFP FPIC
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 1-port 10GBase LAN/WAN-XFP FPIC.
Description
LC/PC
Compliant with the selected XFP optical module.(for the attributes of
XFP modules, see
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-504)
6 Boards
498