1-Port 100Gbase-Cfp Line Processing Unit S (Lpus-100) - Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description

6.8.3 1-Port 100GBase-CFP Line Processing Unit S (LPUS-100)

Overview
Figure 6-33 Appearance of the 1-Port 100GBase-CFP Line Processing Unit S
Applicable Environment
The 1-Port 100GBase-CFP Line Processing Unit S supports packet forwarding at the line
speed of 100-Gbit/s on a single interface, and provides low-cost and customized solutions for
users.1588v2 and HQoS are not supported on this board.
Features and Functions










Panel
Figure 6-34
Figure 6-34 1-Port 100GBase-CFP Line Processing Unit S panel
Issue 01 (2012-09-30)
Processes packets at 100 Gbit/s by the MAC/PHY functional module on the Ethernet
interface.
Supports jumbo frames.
Provides an 100 GE optical interface.
Provides a group of Interlaken interfaces to be connected to the 100 G LPU.
Provides status indicators for the CFP module.
Provides types of loopback functions.
Supports the query of board information.
Provides power supply status and interface status indicators.
Supports hot swapping of flexible cards.
Monitors the power supply and temperature of a board.
shows the panel of the 1-Port 100GBase-CFP Line Processing Unit S.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
228