Huawei NetEngine40E Hardware Description page 421

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Panel
Figure 6-136
Card E.
Figure 6-136 Panel appearance of the 2-Port 10GBase LAN/WAN-XFP Flexible Card E
Table 6-364 Indicators on the panel of the 2-Port 10GBase LAN/WAN-XFP Flexible Card E
Indicator
STATUS
indicator (green)
LINK/ACT
indicator
Interface Attributes
Table 6-365
E.
Table 6-365 Interface attributes of the 2-Port 10GBase LAN/WAN-XFP Flexible Card E
Attributes
Connector type
Optical
interface
attributes
Working mode
Compliant
standard
Frame format
Network
protocol
Issue 01 (2012-09-30)
shows the panel appearance of the 2-Port 10GBase LAN/WAN-XFP Flexible
Table 6-364 describes the indicators on the panel.
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 2-Port 10GBase LAN/WAN-XFP Flexible Card
Description
LC/PC
Compliant with the selected XFP optical module.(for the attributes of
XFP modules, see
Full-duplex
IEEE 802.3ae
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-366)
6 Boards
407