Huawei NetEngine40E Hardware Description page 254

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-41 Appearance of the 1-Port 40GBase LAN-CFP Flexible Card A
Table 6-104 Indicators on the panel of the 1-Port 40GBase LAN-CFP Flexible Card A
Component
RUN (green)
L/A (green)
Interface Attributes
Table 6-105
Table 6-105 Interface attributes of the 1-Port 40GBase LAN-CFP Flexible Card A
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-106 Attributes of 40G CFP optical modules
Attributes
Transmission distance
Center wavelength
Minimum transmitting power
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), it indicates that the
system is running normally. If the indicator blinks twice every 1s (2
Hz), it indicates that the system is in the alarm state.
If the indicator is steady on, it indicates that the link is normal. If the
indicator blinks, it indicates that data is being transmitted. If the
indicator is off, it indicates that the link is Down.
lists the interface attributes of the 1-Port 40GBase LAN-CFP Flexible Card A.
Description
LC
Compliant with the selected CFP optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
10 km (6.21 mi)
1310 nm
-4 dBm
6 Boards
240