40-Port 10/100/1000Base-Rj45 Line Processing Unit S - Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Item

6.21.3 40-Port 10/100/1000Base-RJ45 Line Processing Unit S

Overview
Figure 6-173
Unit S. 1588v2 and HQoS are not supported on this board.
Figure 6-173 Appearance of the 40-Port 10/100/1000Base-RJ45 Line Processing Unit S
Panel
Table 6-495
Table 6-495 Indicators on the panel of the 40-Port 10/100/1000Base-RJ45 Line Processing Unit S
Indicator
OFL button
OFL indicator
(red)
RUN indicator
(green)
Interface Attributes
Table 6-496
Processing Unit S.
Issue 01 (2012-09-30)
Specifications
Storage humidity: 0% to 95%
shows the appearance of the 40-Port 10/100/1000Base-RJ45 Line Processing
describes the indicators on the panel.
Description
It is a button indicating the removal of a board. Before removing a
board, you need to press and hold the OFL button for about 5s till the
OFL indicator is on.
If the indicator is on, you can remove the board safely.
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
lists the interface attributes of the 40-Port 10/100/1000Base-RJ45 Line
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
492