Huawei NetEngine40E Hardware Description page 455

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Interface Attributes
Table 6-417
100/1000Base-X-SFP LPUI.
Table 6-417 Interface attributes of the 2-port 10GBase LAN/WAN-XFP+24-Port
100/1000Base-X-SFP LPUI
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-418 Attributes of 10G XFP optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload
optical power
Optical fiber
type
The 10G XFP multi-mode optical module transceiver supports two types of multi-mode
optical fibers with different cores.
modal/bandwidth, and the transmission distance. During configuration, the length of optical
fibers is restricted by the transmission distance. In addition, the optical fiber with the 50-um
Issue 01 (2012-09-30)
lists the interface attributes of the 2-port 10GBase LAN/WAN-XFP+24-Port
Description
LC/PC
Compliant with the selected XFP and SFP optical modules. (for the
attributes of XFP and SFP modules, see
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19
mi. )
850 nm
-7.3 dBm
-1.3 dBm
-7.5 dBm
-1.0 dBm
Multi-mode
Table 6-419
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-418
10 km ( 6.21 40 km ( 24.86
mi. ) mi. )
1310 nm 1550 nm
-6.0 dBm -1.0 dBm
-1.0 dBm 2.0 dBm
-11.0 dBm -15.0 dBm
0.5 dBm -1.0 dBm
Single-mode Single-mode
shows the relationship between the core, the
6 Boards
and Table 6-420)
80 km ( 49.71
mi. )
1550 nm
0 dBm
4.0 dBm
-24.0 dBm
-7.0 dBm
Single-mode
441