Huawei NetEngine40E Hardware Description page 33

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 2-16 Appearance of the Switch Fabric Unit B(SFUI-200-B)
Panel
Figure 2-17
Figure 2-17 Appearance of the Panel
1. Ejector lever
5. RUN indicator
Table 2-8
Table 2-8 Buttons and indicators on the panel
LED
RUN
(green)
ACT
(green)
OFL (red)
Issue 01 (2012-09-30)
shows the appearance of the panel.
2. ACT indicator
describes the buttons and indicators on the panel.
Description
Before the registration of the SFU: If the indicator blinks twice every second
(2 Hz), the system is in the alarm state.
After the registration of the SFU: If the indicator blinks once every two
seconds (0.5 Hz), the system is running normally.
If the indicator is on, it indicates that the SFU is working normally; if the
green indicator is off, it indicates that the SFU is faulty.
When the SFU is working normally, the OFL indicator is off. After the OFL
button is pressed to power off the SFU, the OFL indicator is on.
The Switch Fabric Unit B (SFUI-200-B) can be used only on the NE40E-X16.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 NE40E-X16 Chassis Overview
3. OFL button 4. OFL indicator
19