Huawei NetEngine40E Hardware Description page 428

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Table 6-376 Indicators on the panel of the 20-Port 10/100/1000Base-RJ45 FPIC
Indicator
STATUS
indicator (green)
Interface Attributes
Table 6-377
Table 6-377 Interface attributes of the 20-Port 10/100/1000Base-RJ45 FPIC
Attributes
Connector type
Working mode
Cable specification
Frame format
Network protocol
Technical Specifications
Table 6-378
Table 6-378 Technical specifications of the 20-Port 10/100/1000Base-RJ45 FPIC
Item
Silk screen of the board
name
Power consumption
(typical value)
Heat dissipation
Board weight
Dimensions (width x
depth x height)
Connector type
Earliest software
version
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
lists the interface attributes of the 20-Port 10/100/1000Base-RJ45 FPIC.
Description
RJ45
10M/100M/1000M auto-sensing and half-duplex and full-duplex
Category 5 unshielded twisted pair (UTP) cable recommended when
the interface works at 10 Mbit/s or 100 Mbit/s; super category 5
Shielded Twisted Pair (STP) cable recommended when the interface
works at 1000 Mbit/s..
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the technical specifications of the 20-Port 10/100/1000Base-RJ45 FPIC.
Specifications
P40-20 x FE/GE-RJ45
About 27 W
88 BTU/hour
About 0.50 kg ( 1.10 lb )
178 mm x 125 mm x 35 mm ( 7.01 in. x 4.92 in. x 1.38 in. )
RJ45
V600R003C00
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
414