Huawei NetEngine40E Hardware Description page 500

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Table 6-483 Indicators on the panel of the 4-port 10GBase WAN/LAN-XFP Line Processing Unit
S
Indicator
LINK/ACT
indicator(green)
OFL button
OFL indicator
(red)
RUN indicator
(green)
Interface Attributes
Table 6-484
Processing Unit S.
Table 6-484 Interface attributes of the 4-port 10GBase LAN/WAN-XFP Line Processing Unit S
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-485 Attributes of 10G XFP optical modules
Attributes
Maximum
transmission
distance
Center
wavelength
Minimum
Issue 01 (2012-09-30)
Description
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
It is a button indicating the removal of a board. Before removing a
board, you need to press and hold the OFL button for about 5s till the
OFL indicator is on.
If the indicator is on, you can remove the board safely.
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
lists the interface attributes of the 4-port 10GBase LAN/WAN-XFP Line
Description
LC/PC
Compliant with the selected XFP optical module. (for the attributes of
XFP modules, see
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19
mi. )
850 nm
-7.3 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-485)
10 km ( 6.21 40 km ( 24.86
mi. ) mi. )
1310 nm 1550 nm
-6.0 dBm -1.0 dBm
6 Boards
80 km ( 49.71
mi. )
1550 nm
0 dBm
486