Huawei NetEngine40E Hardware Description page 437

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-144 Appearance of the 40-Port 100/1000Base-X-SFP Integrated Line Processing
Unit(LPUI-40)
Panel
Table 6-392
Table 6-392 Indicators on the panel of the 40-Port 100/1000Base-X-SFP Integrated Line
Processing Unit(LPUI-40)
Component
OFL button
OFL indicator
(red)
RUN indicator
(green)
Interface Attributes
Table 6-393
Processing Unit(LPUI-40).
Table 6-393 Interface attributes of the 40-Port 100/1000Base-X-SFP Integrated Line Processing
Unit(LPUI-40)
Attributes
Connector type
Optical interface
attributes
Working mode
Frame format
Network protocol
Issue 01 (2012-09-30)
lists the indicators on the panel.
Description
It is a button indicating the removal of a board. Before removing a
board, you need to press and hold the OFL button for about 5s till the
OFL indicator is on.
If the indicator is on, you can remove the board.
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
lists the interface attributes of the 40-Port 100/1000Base-X-SFP Integrated Line
Description
LC/PC,RJ45
Compliant with the selected SFP optical module.
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
423