Huawei NetEngine40E Hardware Description page 553

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-199 Panel appearance of the the 40-port 10/100/1000Base-RJ45 FPIC
Table 6-566 Indicators on the panel of the 40-port 10/100/1000Base-RJ45 FPIC
Indicator
STATUS
indicator (green)
LINK
(green)/ACT
indicator (yellow)
Interface Attributes
Table 6-567
Table 6-567 Interface attributes of the 40-port 10/100/1000Base-RJ45 FPIC
Attributes
Connector type
Working mode
Cable specification
Frame format
Network protocol
Technical Specifications
Table 6-568
Table 6-568 Technical specifications of the 40-port 10/100/1000Base-RJ45 FPIC
Item
Silk screen of the
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state.
If the indicator blinks twice every 1s (2 Hz), the FPIC is in the alarm
state.
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
lists the interface attributes of the 40-port 10/100/1000Base-RJ45 FPIC.
Description
RJ45
10M/100M/1000M auto-sensing and half-duplex and full-duplex
Category 5 unshielded twisted pair (UTP) cable recommended when
the interface works at 10 Mbit/s or 100 Mbit/s; Super category 5
Shielded Twisted Pair (STP) cable recommended when the interface
works at 1000 Mbit/s
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the technical specifications of the 40-port 10/100/1000Base-RJ45 FPIC.
Specifications
40 x 10/100/1000Base-TX-RJ45
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
539