20-Port 1000Base-X-Sfp Flexible Card E(P40-E) - Huawei NetEngine40E Hardware Description

Hide thumbs Also See for NetEngine40E:

Table of Contents

HUAWEI NetEngine40E Universal ServiceRouter

Hardware Description

6.16.7 20-Port 1000Base-X-SFP Flexible Card E(P40-E)

Figure 6-133

Figure 6-133 Appearance of the 20-Port 1000Base-X-SFP Flexible Card E(P40-E)

Figure 6-134

Figure 6-134 Panel appearance of the 20-Port 1000Base-X-SFP Flexible Card E(P40-E)

Table 6-358 Indicators on the panel of the 20-Port 1000Base-X-SFP Flexible Card E(P40-E)

indicator (green)

Issue 01 (2012-09-30)

shows the appearance of the 20-Port 1000Base-X-SFP Flexible Card E(P40-E).

The use of electrical-interface SFP modules has limitations in some cases.

1. If the manufacture date of the LPUF-40 is before 2011-10-01, electrical-interface SFP modules can

only be inserted into the interfaces with even numbers on a flexible card. Each flexible card can be

equipped with a maximum of 10 electrical-interface SFP modules. If the electrical SFP modules are

inserted into interfaces with odd numbers, the system will display a message of "......transceiver type is

not supported."

2. Run the display elabel slot command in the user view to view the value of the "Manufactured=" field.

If the value of the "Manufactured=" field is 2011-10-01 or a later date, there is no limitation on the use

of electrical-interface SFP modules. For example:

<HUAWEI>display elabel slot 8

Manufactured=2010-12-25

VendorName=Huawei

shows the panel appearance of the 20-Port 1000Base-X-SFP Flexible Card

describes the indicators on the panel.

If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the

normal state state. If the indicator blinks twice every 1s (2 Hz), the

Huawei Proprietary and Confidential