Sfu Indicators; Lpu Indicators - Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Indicator
ALM indicator
ACT indicator
CF read-write
indicator
LINK indicator
(on the Ethernet
interface)
LINK indicator
(on the Ethernet
interface)
A.4.4 SFU Indicators
Table A-20
Table A-20 SFU indicators
Indicator
OFL indicator
RUN indicator
ACT Indicator
A.4.5 LPU Indicators
Table A-21
Table A-21 LPU indicators
Indicator
OFL indicator
RUN indicator
Issue 01 (2012-09-30)
Color Description
Red If the indicator is on, the system is in the alarm state. If
the indicator is off, the system is in the normal state.
Green If the indicator is on, the SRU is in the active state. If the
indicator is off, the SRU is in the standby state.
Red If the indicator is blinking, data is being read or written.
If the indicator is off, no data is being read or written.
NOTE
Green If the indicator is off, the link is Down. If the indicator is
on, the link is Up.
Yellow If the indicator is off, no data is being read or written. If
the indicator is blinking, data is being read or written.
lists the status and descriptions of SFU indicators.
Color Description
Red If the indicator is on, you can remove a board.
Green If the indicator blinks once every 2s (0.5 Hz), the SFU is
in the normal state. If the indicator blinks twice every 1s
(2 Hz), the SFU is in the alarm state.
If the indicator is on, the SFU is in the normal state. If the
Green
indicator is off, the SFU is in the abnormal state.
lists the status and descriptions of LPU indicators.
Color Description
Red If the indicator is on, you can remove the board.
Green 

Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
When the indicator is blinking, do not remove the CF card.
If the indicator blinks once every 2s (0.5 Hz), the
FPIC is in the normal state state.
If the indicator blinks twice every 1s (2 Hz), the FPIC
is in the alarm state.
A List of Indicators
645