Huawei NetEngine40E Hardware Description page 88

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Table 3-30
Table 3-30 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes
Attribute
Connector type
Operation mode
Standard
compliance
Cable
specification
Table 3-31
Table 3-31 Console interface attributes
Attribute
Connector type
Operation mode
Electrical
attribute
Baud rate
Data equipment
type
Cable
specification
Table 3-32
Table 3-32 AUX interface attributes
Attribute
Connector type
Operation mode
Electrical
attribute
Issue 01 (2012-09-30)
lists the 10Base-T/100Base-TX/1000Base-T-RJ45 interface attributes.
Description
RJ45
10M/100M/1000M auto-sensing interfaces, supporting half-duplex and
full-duplex modes
IEEE 802.3-2002
Category 5 unshielded twisted pair (UTP) cables recommended when
the interface rate is 10 Mbit/s or 100 Mbit/s; super category 5 Shielded
Twisted Pair (STP) cables recommended when the interface rate is
1000 Mbit/s
lists the console interface attributes.
Description
RJ45
Duplex Universal Asynchronous Receiver/Transmitter (UART)
RS-232
9600 bit/s (default value), which can be changed as required
DCE (Data Circuit-terminating Equipment)
8-core shielded cable
lists the AUX interface attributes.
Description
RJ45
Duplex UART
RS-232
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 NE40E-X8 Chassis Overview
74