Interface Attributes Of 100Base-Fx; Interface Attributes Of 1000Base-X-Sfp - Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Table C-1 Interface attributes of the 10Base-T/100Base-TX/1000Base-T-RJ45
Attributes
Connector type
Working mode
Cable specification
Frame format
Network protocol
C.2 Interface Attributes of 100Base-FX
Table C-2
Table C-2 Attributes of 100M SFP optical modules
Attributes
Transmission
distance
Center wavelength
Minimum
transmitting power
Maximum
transmitting power
Receiving
sensitivity
Overload power
Optical fiber type
C.3 Interface Attributes of 1000Base-X-SFP
Table C-3
Table C-3 Interface attributes of the 1000Base-X-SFP
Attributes
Connector type
Interface attributes
Issue 01 (2012-09-30)
Description
RJ45
10M/100M/1000M auto-sensing and half-duplex and full-duplex
Super category 5 Shielded Twisted Pair (STP) cable is
recommended.
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
lists the interface attributes of 100Base-FX.
Description
2 km ( 1.24
mi. )
1310 nm
-19.0 dBm
-14.0 dBm
-30.0 dBm
-14.0 dBm
Multi-mode
lists the interface attributes of 1000Base-X-SFP.
Description
LC/PC
Compliant with the selected SFP optical module. (For the
attributes of SFP modules, see
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
15 km ( 9.32 40 km ( 24.86
mi. ) mi. )
1310 nm 1310 nm
-15.0 dBm -5.0 dBm
-8.0 dBm 0 dBm
-31.0 dBm -37.0 dBm
-8.0 dBm -10.0 dBm
Single-mode Single-mode
Table C-4
C List of Interface Attributes
80 km ( 49.71
mi. )
1550 nm
-5.0 dBm
0 dBm
-37.0 dBm
-10.0 dBm
Single-mode
.)
666