Huawei NetEngine40E Hardware Description page 532

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Figure 6-187 Panel appearance of the 12-port 100/1000Base-SFP Flexible Card A(Supporting
1588v2)
Table 6-533 Indicators on the panel of the 12-port 100/1000Base-SFP Flexible Card A(Supporting
1588v2)
Indicator
STATUS
indicator (green)
LINK/ACT
indicator
Interface Attributes
Table 6-534
A(Supporting 1588v2).
Table 6-534 Interface attributes of the 12-port 100/1000Base-SFP Flexible Card A(Supporting
1588v2)
Attributes
Connector type
Optical interface
attributes
Working mode
Issue 01 (2012-09-30)
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 12-port 100/1000Base-SFP Flexible Card
Description
LC/PC
Compliant with the selected SFP optical module
Full-duplex
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
518