Huawei NetEngine40E Hardware Description page 503

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description


Figure 6-172 Appearance of the 40-port 100/1000Base-SFP Line Processing Unit S
Panel
Table 6-489
Table 6-489 Indicators on the panel of the 40-port 100/1000Base-SFP Line Processing Unit S
Indicator
OFL button
OFL indicator
(red)
RUN indicator
(green)
Interface Attributes
Table 6-490
Unit S.
Table 6-490 Interface attributes of the 40-port 100/1000Base-SFP Line Processing Unit S
Attributes
Connector type
Optical interface
attributes
Working mode
Frame format
Network protocol
Issue 01 (2012-09-30)
Provides 1000M electrical interfaces through the electrical module
Supports intermixing of all modules
describes the indicators on the panel.
Description
It is a button indicating the removal of a board. Before removing a
board, you need to press and hold the OFL button for about 5s till the
OFL indicator is on.
If the indicator is on, you can remove the board safely.
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
lists the interface attributes of the 40-port 100/1000Base-SFP Line Processing
Description
LC/PC
Compliant with the selected SFP optical module
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
489