Huawei NetEngine40E Hardware Description page 235

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Component
L/A (green)
Interface Attributes
Table 6-76
Processing Unit S.
Table 6-76 Interface attributes of the 10-Port 10GBase LAN/WAN-XFP Line Processing Unit S
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Table 6-77 Attributes of 10G XFP optical modules
Attributes
Transmission
distance
Center
wavelength
Minimum
transmitting
power
Maximum
transmitting
power
Receiving
sensitivity
Overload
power
Issue 01 (2012-09-30)
Description
Hz), it indicates that the system is in the alarm state.
If the indicator is steady on, it indicates that the link is normal. If the
indicator blinks, it indicates that data is being transmitted. If the
indicator is off, it indicates that the link is Down.
lists the interface attributes of the 10-Port 10GBase LAN/WAN-XFP Line
Description
LC/PC
Compliant with the selected XFP optical module. (For the attributes of
XFP modules, see
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Description
0.3 km ( 0.19
mi. )
850 nm
-7.3 dBm
-1.3 dBm
-7.5 dBm
-1.0 dBm
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 6-77)
10 km ( 6.21 40 km ( 24.86
mi. ) mi. )
1310 nm 1550 nm
-6.0 dBm -1.0 dBm
-1.0 dBm 2.0 dBm
-11.0 dBm -15.0 dBm
0.5 dBm -1.0 dBm
6 Boards
80 km ( 49.71
mi. )
1550 nm
0 dBm
4.0 dBm
-24.0 dBm
-7.0 dBm
221