Huawei NetEngine40E Hardware Description page 110

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Indicat
or
Fault
indicato
r
The AC power module provides the following functions:






Table 4-6
Table 4-6 Technical parameters of the AC power supply module
Item
Dimensions (width x depth
x height)
Weight
Input voltage range
Input current
Output voltage
Maximum output current
Maximum output power
Issue 01 (2012-09-30)
Statu
Color
s
Blinki
ng at
0.5 Hz
Red Off
Stead
y on
Protection against overvoltage of input power
Protection against undervoltage of input power
Protection against overvoltage of output power
Protection against current-limiting of output power
Protection against short circuit
Protection against overtemperature
lists the technical parameters of the AC power module.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The rectifier is
hibernated.
The rectifier
communication
is interrupted.
The rectifier is
not faulty.
The rectifier is locked
due to output
overvoltage.
There is no output
because the rectifier is
faulty.
Technical Parameter
40.8 mm x 105 mm x 281 mm (1.61 in. x 4.13 in. x 11.06
in.)
About 1.8 kg (3.97 lb)
85 V AC ~ 300 V AC
< 17 A
43.2 ~ 58 V DC
Default voltage: 53.5 V DC
51 A
2200 W
4 NE40E-X3 Chassis Overview
Measures
No measure is required.
Replace the rectifier or monitoring
module.
No measure is required.
Pull out the rectifier and reinsert it
after 1 minute.
Replace the rectifier.
96