2-Port 10Gbase Lan/Wan-Sfp+ + 24-Port 100/1000Base-X-Sfp Line Processing Unit S(Lpus-51) - Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Product Specifications
Table 6-247
Processing Unit S.
Table 6-247 Product specifications of the 48-Port 100/1000Base-X-SFP Line Processing Unit S
Item
Supported protocol
and service
Interface type
Reliability and
availability
NMS
Operating
conditions
Storage conditions
6.14.4 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
100/1000Base-X-SFP Line Processing Unit S(LPUS-51)
Overview
Figure 6-94
100/1000Base-X-SFP Line Processing Unit S(LPUS-51).HQoS is not supported on this board.
Port 0 and Port 1 can work in the LAN or WAN mode. Port 2 to Port 25 can work in the LAN
mode.
The 24-Port 100/1000Base-X-SFP can use the following optical modules:




Issue 01 (2012-09-30)
lists the product specifications of the 48-Port 100/1000Base-X-SFP Line
Specifications
Ethernet_II, Ethernet_SAP, Ethernet_SNAP
PTP
SFP
Hardware features:
 Supporting hot swap
Enhanced command-line interface
Craft Works Interface (CWI)
SNMP and MIB support
Long-term ambient temperature: 0° C to 45° C ( 32° F to 113° F )
Short-term ambient temperature: -5° C to +55° C ( 23° F to 131° F )
Long-term relative humidity: 5% to 85%
Short-term relative humidity: 0% to 95%
Storage temperature: -40° C to +70° C ( -40° F to 158° F )
Storage humidity: 0% to 95%
shows the appearance of the 2-Port 10GBase LAN/WAN-SFP+ + 24-Port
GE optical module, providing features of GE optical interfaces
FE optical module, providing features of FE optical interfaces
Electrical interface SFP module, providing features of the 10 M/100 M/1000 M
auto-sensing electrical interfaces
Intermixing of the preceding modules
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
333