Huawei NetEngine40E Hardware Description page 559

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
Panel
Figure 6-203
100/1000Base-X-SFP FPIC.
Figure 6-203 Panel appearance of the 2-port 10GBase LAN/WAN-XFP+20-Port
100/1000Base-X-SFP FPIC
Table 6-576
Table 6-576 Indicators on the panel of the 2-port 10GBase LAN/WAN-XFP+20-Port
100/1000Base-X-SFP FPIC
Indicator
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 6-577
100/1000Base-X-SFP FPIC.
Table 6-577 Interface attributes of the 2-port 10GBase LAN/WAN-XFP+20-Port
100/1000Base-X-SFP FPIC
Attributes
Connector type
Optical
interface
attributes
Working mode
Frame format
Network
protocol
Issue 01 (2012-09-30)
shows the panel appearance of the 2-port 10GBase LAN/WAN-XFP+20-Port
Table 6-576
lists the indicators on the panel.
Description
If the indicator blinks once every 2s (0.5 Hz), the FPIC is in the
normal state state. If the indicator blinks twice every 1s (2 Hz), the
FPIC is in the alarm state.
If the indicator is on, the link is Up. If the indicator is blinking, the
data is being read or written. If the indicator is off, the link is Down.
lists the interface attributes of the 2-port 10GBase LAN/WAN-XFP+20-Port
Description
LC/PC,RJ45
Compliant with the selected XFP optical module. (for the attributes of
XFP modules, see
Full-duplex
Ethernet_II, Ethernet_SAP, and Ethernet_SNAP
IP
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
describes the indicators on the panel.
Table 6-578)
6 Boards
545