8-Port 100/1000 Base-X-Sfp Flexible Card A (Supporting 1588V2) - Huawei NetEngine40E Hardware Description

HUAWEI NetEngine40E Universal ServiceRouter
Hardware Description
6.23.12 8-Port 100/1000 Base-X-SFP Flexible Card A (Supporting
1588v2)
Overview
Figure 6-227
The 8-port 100/1000 Base-X-SFP Flexible Card A is called E8GFB for short. It is an flexible
card that supports IEEE1588v2. The E8GFB is applicable to the 10 G LPU (that is LPUF-10)
and supports the following interface modules:




Figure 6-227 Appearance of the 8-port 100/1000 Base-X-SFP Flexible Card A (Supporting
1588v2)
Panel
Table 6-645
Table 6-645 Indicators on the panel of the 8-port 100/1000 Base-X-SFP Flexible Card A
Indicator
STATUS
indicator (green)
LINK/ACT
indicator(green)
Issue 01 (2012-09-30)
shows 8-port 100/1000 Base-X-SFP Flexible Card A (Supporting 1588v2).
GE optical module, providing features of GE optical interfaces
FE optical module, providing features of FE optical interfaces
Electrical interface SFP module, providing features of the 1000M electrical interfaces
Intermixing of the preceding modules
The 8-port 100/1000 Base-X-SFP Flexible Card A does not support convergence when installed on an
LPU (LPUF-50, occupying four sub-slots).
describes the indicators on the panel.
Description
If the indicator blinks every 2s (0.5 Hz), the flexible card is in the
normal state state.
If the indicator blinks twice every 1s (2 Hz), the flexible card is in the
alarm state.
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written.
If the indicator is off, the link is Down.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Boards
590